ACHILLES VINYLAS is a self-cling PVC film suitable for use in clean rooms provided both with excellent antistatic performance (Surface resistivity 10¹⁰Ω) and UV blocking property. Just applying ACHILLES VINYLAS on an ordinary flat glass sheet changes the glass to antistatic UV blocking glass.
As adhesive is not used, ACHILLES VINYLAS will not impair visibility, and there is no worry of contamination due to left over adhesive.

Stock Item

Caution

1. Apply only to glass or plastic sheet with smooth surface. Not suitable for matte, embossed or curved surfaces.
2. Flexible PVC, when in contact with a different kind of plastic for a long time, may cause contamination of the plastic surface due to migration of plasticizer. Before applying ACHILLES VINYLAS on plastic materials, consult with your agent to make sure that no problem will occur.
3. ACHILLES VINYLAS cannot be used as a shatter-resistant film.
4. It is not recommended to use for the application required high visibility.

How to apply ACHILLES VINYLAS on a glass surface

1. Prepare the VINYLAS 2 to 3 cm wider and longer than the surface to be covered.
2. Thoroughly clean the glass surface. Then wet the surface with water spray.
3. Separate the VINYLAS from the releasing liner, and then, apply the VINYLAS on the glass so that releasing paper side becomes in contact with the glass.
4. Remove air and water from between the glass surface and the VINYLAS film, from center to each side, using a plastic plate.
5. Cut excess film over the glass surface with a suitable cutting knife.